Raindrip Inc P1075UB Full Circle Micro Spray Jet Assembly

Product Description

The RAINDRIP INC P1075UB is a single-piece, full circle micro spray jet assembly designed for low-volume drip and micro-irrigation systems. It delivers 31.4 GPH at 20 psi with a wetted diameter of up to 5.9 feet, making it suitable for shrub beds, garden plots, and landscape areas requiring uniform water distribution. The assembly includes a 13-inch green stake, an 8-inch adjustable riser, and a 1/4-inch barbed adapter, giving installers a complete, ready-to-use unit. Licensed irrigators and landscape contractors are the typical installers for this type of micro-spray component.

This assembly is used in residential and light commercial drip irrigation layouts where consistent, full-circle spray coverage is required around individual plants or across planting zones. The adjustable riser allows the spray head height to be tuned to ground cover or plant canopy height. The 1/4-inch barbed adapter connects directly to standard 1/4-inch poly distribution tubing. Each package contains 30 assemblies, making it practical for larger zone installations or multi-zone projects completed in a single supply run.

Key Features

• Full circle spray pattern for uniform 360-degree water distribution
• Flow rate of 31.4 GPH at 20 psi for predictable zone calculations
• Wetted diameter up to 5.9 feet per head
• 13-inch green stake blends with landscape and provides stable ground anchoring
• 8-inch adjustable riser accommodates varying plant and ground cover heights
• 1/4-inch barbed adapter for direct connection to standard poly distribution tubing
• 30 assemblies per package for efficient multi-head installations

Compatibility

Designed for use with standard 1/4-inch poly drip distribution tubing in residential and light commercial micro-irrigation systems.

Installation Notes

Installation is typically performed by licensed irrigators or landscape contractors following local irrigation codes. Shut off the main irrigation supply valve before connecting or repositioning assemblies. Push the barbed adapter firmly into the 1/4-inch poly tubing to ensure a leak-free connection, and verify system operating pressure is at or near 20 psi for rated flow performance. Do not exceed the rated operating pressure, as over-pressurization can cause barb separation or uneven spray patterns.