Rain Bird 20659212 Fixed Spray Nozzle 39-45 Ft

Product Description

The RAIN BIRD 20659212 is a fixed spray nozzle designed for use with Rain Bird impact sprinklers in residential and commercial irrigation systems. It delivers a flow rate of 5.5 to 8.4 gallons per minute (gpm) across a pressure range of 25 to 60 psi, making it suitable for medium to large turf and landscape zones. The nozzle supports both full-circle and part-circle spray patterns, giving irrigation technicians flexibility during layout and retrofit work. Constructed from beige-colored plastic, it is lightweight and corrosion resistant. This nozzle is an interchangeable replacement, allowing field swaps without specialized tooling.

This nozzle is intended for use with the Rain Bird 2045-PJ Maxi-Paw, Maxi-Bird, and P5R impact sprinklers. It is suited for residential lawn irrigation, commercial landscape applications, and sports turf systems where coverage distances of 39 to 45 feet are required. The fixed nozzle design maintains a consistent throw radius at operating pressure, reducing the need for frequent field adjustment. Irrigation contractors and landscape professionals typically install this nozzle during new system installation or as a direct replacement during routine sprinkler service.

Key Features

• Flow rate of 5.5 to 8.4 gpm supports medium to large coverage zones
• Operating pressure range of 25 to 60 psi suits typical residential and commercial irrigation supply
• Full-circle and part-circle spray pattern options in a single nozzle
• Coverage throw of 39 to 45 feet for large turf areas
• Half-inch male connection for direct fitment to compatible impact sprinkler bodies
• Plastic construction resists corrosion in outdoor irrigation environments

Compatibility

Designed for use with the Rain Bird 2045-PJ Maxi-Paw, Maxi-Bird, and P5R impact sprinklers. Nozzles are interchangeable across compatible sprinkler bodies in this product family.

Installation Notes

Irrigation technicians should shut off system water supply and relieve line pressure before removing or installing the nozzle. Confirm that operating pressure at the sprinkler head falls within the 25 to 60 psi range before final commissioning. Hand-tighten the half-inch male connection to avoid cracking the plastic fitting; use a strap wrench if additional snugging is needed. Follow local irrigation codes and backflow prevention requirements as applicable to the installation.