Quiktron 810-LL2-017 Lc Lc 62.5 Duplex Multimode Fiber Cable

Product Description

The QUIKTRON 810-LL2-017 is a duplex multimode fiber optic patch cable with LC connectors on both ends. It operates on 62.5/125 micron multimode fiber and features a PVC outer jacket, making it suitable for indoor data and network installations. At 5 meters in length, this cable provides a practical run for rack-to-rack, switch-to-switch, or equipment-to-patch-panel connections. Licensed electricians, structured cabling technicians, and network infrastructure installers typically deploy this type of patch cable in commercial and light industrial settings where multimode fiber backbones are already in place.

This patch cable is designed for indoor multimode fiber optic networks using LC-style connectors. The duplex configuration supports full-duplex transmission, carrying separate transmit and receive signals on two fiber strands simultaneously. The 62.5/125 micron core diameter is a legacy and still widely used multimode standard found in many existing enterprise and commercial building infrastructures. The PVC jacket suits plenum-exempt, conduit-run, or general indoor environments where riser or plenum-rated jackets are not required by code.

Key Features

• LC to LC duplex connector configuration for full-duplex fiber transmission
• 62.5/125 micron multimode fiber core for compatibility with established multimode infrastructure
• 5 meter cable length suitable for short in-rack or cross-rack runs
• PVC outer jacket rated for general indoor use
• Sold as a single cable assembly (each)

Compatibility

Designed as a standard LC duplex multimode patch cable for use with 62.5/125 micron multimode fiber optic networks and equipment featuring LC-type ports.

Installation Notes

Installation is typically performed by structured cabling technicians or licensed low-voltage contractors. Before connecting or disconnecting fiber patch cables, power down or disable the optical transceivers where possible to avoid exposure to laser emissions. Handle LC connectors by the connector body, not the fiber strand, and inspect ferrule end-faces with an appropriate fiber inspection tool prior to mating. Installations in commercial buildings should comply with applicable sections of the NEC regarding cable jacket ratings for the intended environment.