Quam System 12/VC Ceiling Tile Replacement Loudspeaker 15W

Product Description

The QUAM SYSTEM 12/VC is a complete, shallow-depth ceiling tile replacement loudspeaker system designed for drop-ceiling grid installations in commercial and institutional audio distribution applications. The system ships fully assembled with no field wiring of driver components required. It includes an 8C5PAX 8-inch dual-cone loudspeaker with a 5-ounce magnet and a TBLU 25/70-volt transformer rated at 5 watts, with a screwdriver- or knob-adjusted volume control. The enclosure is molded fiber construction at 1,412 cubic inches of internal displacement, and the baffle is powder-coated steel with standard perforation. Nominal impedance is 8 ohms and sensitivity is 92 dB. The system is domestically manufactured in the United States.

This loudspeaker is intended for use in 2-foot by 2-foot suspended ceiling grid systems in commercial, educational, hospitality, or institutional spaces where distributed 25-volt or 70-volt audio systems are deployed. Typical applications include background music, paging, and life-safety voice notification infrastructure. The integrated volume control allows per-zone or per-speaker output adjustment without external attenuators. Four seismic tie-off points are built into the enclosure for installations subject to seismic code compliance requirements. A cable clamp is included to secure the audio feed cable.

Key Features

• Complete drop-in system: 8-inch dual-cone driver, 25/70-volt transformer, and volume control included
• Screwdriver- or knob-adjusted volume control for local output level setting
• Powder-coated steel baffle with standard perforation pattern, finished in white
• Four seismic tie-off points for code-compliant suspended ceiling installations
• Molded fiber enclosure at 1,412 cubic inches internal displacement, shallow-depth profile
• Frequency response from 65 Hz to 17 kHz at 15 watts RMS maximum output
• No assembly required - ready to install out of the box

Compatibility

Designed as a direct tile replacement for standard 2-foot by 2-foot suspended ceiling grid systems. Compatible with 25-volt and 70-volt distributed audio systems.

Installation Notes

Installation should be performed by a qualified low-voltage audio technician or licensed electrician in accordance with applicable local codes and NEC Article 640 governing audio signal processing and distribution equipment. Power the amplifier and de-energize the distributed audio circuit before connecting or disconnecting the loudspeaker. Verify transformer tap selection and total system wattage load against the amplifier output capacity before commissioning. Secure the seismic tie-off points to the building structure where seismic bracing is required by local code.