Qep 99781 Lash Tile Leveling Clips 1/8 Inch Spacer

Product Description

The QEP 99781 is a bag of single-use tile leveling clips designed for use with the QEP LASH Tile Leveling System. These clips serve as Part A of a two-part leveling system, working alongside separately sold wedges (Part B) to hold tile flat, level, and evenly spaced during installation. The clips maintain a 1/8 inch joint spacing while lifting adjacent tiles to a consistent height, preventing lippage and correcting minor tile bowing. Sold by the bag, these clips are suitable for both floor and wall tile applications and are a standard tool on professional tile setting jobs.

These leveling clips are used in residential and commercial tile installations on floors and walls. They are compatible with the QEP LASH wedge component, which is sold separately and can be reused across multiple jobs. The clips are designed for single use and are removed after the adhesive sets by striking them below the tile surface with a rubber mallet or floor mallet. This system is used by licensed tile setters and flooring contractors as well as experienced DIY installers working with ceramic, porcelain, or similar tile formats.

Key Features

• Maintains 1/8 inch grout joint spacing between tiles
• Prevents lippage by holding adjacent tiles at a consistent height
• Corrects minor tile bowing during the set period
• Designed to snap off cleanly below the tile surface with a mallet strike for fast removal
• Part A of the two-part QEP LASH system — compatible wedges sold separately
• Suitable for both floor and wall tile installations

Compatibility

Designed for use with the QEP LASH Tile Leveling System. Requires QEP LASH wedges, sold separately, to complete the leveling assembly.

Installation Notes

Tile setters should insert the clip beneath the edge of the tile before the mortar sets, then slide the wedge through the clip base to apply even pressure across adjacent tiles. Once the mortar or adhesive has cured, remove the clips by striking them firmly with a rubber mallet or floor mallet to break them off cleanly below the finished surface. These clips are single-use only and should not be reused after removal. Work in accordance with ANSI A108 tile installation standards where applicable.