Pro-source PSXK009 Anchor Shackle Screw Pin Galvanized

Product Description

The PRO-SOURCE PSXK009 is a screw pin anchor shackle built for rigging, lifting, and load-securing applications where a reliable, removable connection is required. The anchor bow design accepts multi-directional loading, making it a common choice when slings or chains need to be attached to hooks, pad eyes, or structural attachment points. Constructed from carbon steel with a galvanized finish, the PSXK009 resists corrosion in outdoor and marine-adjacent environments. The 7/16-inch pin diameter provides the structural cross-section needed for rated lifting service. This shackle is installed and removed by hand-tightening the screw pin, with a cotter or mousing wire used in dynamic load applications to prevent pin rotation.

The PSXK009 is suited for general rigging, construction, marine deck hardware, agricultural equipment, and utility work. Its anchor-style bow accepts loads from multiple angles without the load-path restriction common to bow shackles with narrower profiles. The galvanized carbon steel construction makes it appropriate for use in wet, outdoor, or corrosive environments where bare steel would degrade quickly. Riggers, ironworkers, marine technicians, and maintenance trades install this type of shackle for both temporary and semi-permanent connections.

Key Features

• Anchor bow accepts multi-directional loads without side-loading the pin
• Screw pin design allows tool-free installation and removal in the field
• Galvanized carbon steel finish provides corrosion resistance for outdoor and marine use
• 7/16-inch pin diameter suitable for standard rigging applications
• Jaw inside height of 1.4375 inches and inside width of 0.6562 inches accommodate a range of sling hardware

Compatibility

Designed as a standard screw pin anchor shackle for general rigging and load-securing applications where an anchor-style bow and removable screw pin connection are required.

Installation Notes

Installation and removal should be performed by qualified rigging or maintenance personnel following applicable ASME B30.26 or OSHA rigging standards. Always inspect the shackle body, pin threads, and pin seat for wear, cracks, or deformation before use. In dynamic lifting or overhead load applications, the screw pin should be moused with seizing wire to prevent the pin from backing out under load. Never exceed the rated working load limit marked on the shackle body.