Pro-source PRO83822 Pleated Air Filter 32x32x6 Polyester

Product Description

The PRO-SOURCE PRO83822 is a pleated air filter designed for large-format HVAC and fan shroud applications requiring a 32 x 32 x 6 inch filter size. Constructed with a polyester filter media, it captures airborne particulates as air passes through the pleated surface. The 6-inch depth increases media surface area compared to standard 1- or 2-inch filters, supporting higher dust-holding capacity and longer service intervals. The filter ships without an integrated frame, so installation requires a compatible filter rack or housing that accepts frameless media. Weighing 0.6 pounds, it is lightweight enough for single-technician handling. HVAC technicians and mechanical contractors are the typical installers for this filter type.

This filter is sized for large commercial or industrial air handling applications where a 32 x 32 nominal footprint is specified. The 6-inch nominal depth suits deeper filter housings found in rooftop units, air handling units, and large fan coil systems. It is suited for installations that call for polyester media rated to a maximum operating temperature of 150 degrees F. The frameless construction makes it compatible with filter racks designed to support media packs directly without relying on a cardboard or metal border frame.

Key Features

• Pleated polyester media for effective particulate capture across a large filter face
• 32 x 32 x 6 inch nominal size fits deep-filter housings in commercial and industrial AHUs
• 6-inch depth provides increased media surface area and extended service life compared to shallow filters
• Frameless design for use with filter racks that support media packs directly
• Rated for continuous operation up to 150 degrees F
• Lightweight at 0.6 pounds for easy single-technician installation

Compatibility

Designed as an OEM-style replacement pleated filter media for large commercial air handling units, fan coil units, and rooftop systems that accept a 32 x 32 x 6 inch frameless filter pack.

Installation Notes

Installation is typically performed by licensed HVAC technicians or qualified mechanical contractors. Always shut down the air handling unit and confirm the system is de-energized before opening filter access panels or racks. Verify the housing is designed to support a frameless media pack before inserting this filter, as the lack of an integrated frame requires positive retention by the rack. Inspect the filter rack seals and housing gaskets during replacement to prevent air bypass around the filter media.