Pro-source PRO11726 Polyester Air Filter Media Pad Merv 7

Product Description

The PRO-SOURCE PRO11726 is a 16 x 20 x 2 inch polyester air filter media pad rated MERV 7 for use in a wide range of HVAC air handling applications. It delivers 667 CFM of rated airflow at a maximum face velocity of 300 FPM, with an initial resistance of 0.15 inches w.g. The polyester media includes a dry tackifier treatment to help capture and hold particles. With 35% particle capture efficiency and 87% arrestance efficiency, this pad is suited for light commercial and residential filtration where moderate particulate control is required. HVAC technicians and facilities maintenance personnel are the typical installers.

This media pad is designed for use with any air handling unit that accepts a 16 x 20 x 2 inch pad-style filter. Common applications include make-up air units, fan coil units, air handlers, and return air grilles in both residential and light commercial settings. The flat pad format allows it to fit into standard filter holding frames, media pads racks, and angle filter housings. It is suitable for continuous use in systems where temperatures do not exceed 180 degrees F.

Key Features

• MERV 7 rating with 35% particle capture efficiency and 87% arrestance efficiency
• Polyester media construction with dry tackifier for enhanced particle retention
• Rated airflow of 667 CFM at up to 300 FPM maximum face velocity
• Low initial resistance of 0.15 inches w.g. reduces system static pressure impact
• Rated for continuous use up to 180 degrees F maximum working temperature
• 34 grams per square foot media weight for consistent density and performance

Compatibility

Designed for use with any unit accepting a 16 x 20 x 2 inch pad-style air filter media insert, as specified by the manufacturer.

Installation Notes

Installation is typically performed by HVAC technicians or qualified maintenance personnel. Power down the air handling unit before removing or installing filter media. Ensure the media pad is seated flat and fully within the filter holding frame with no bypass gaps around the edges. Verify airflow direction markings on the housing align with the intended direction of travel through the media.