Pro-source PRO10445 Pleated Air Filter 16x25x1 Merv 10

Product Description

The PRO-SOURCE PRO10445 is a MERV 10, wire-backed pleated air filter designed for residential and light commercial HVAC systems. It measures 16 x 25 x 1 inches nominal (actual dimensions: 15-1/2 x 24-1/2 x 3/4 inches) and delivers 55% particle capture efficiency. The synthetic pleated media is supported by a wire backing that holds pleat geometry under airflow, maintaining consistent performance across the filter face. A rigid paperboard frame ensures proper fit and prevents bypass. Licensed HVAC technicians and facilities maintenance staff install this filter as a routine maintenance component in forced-air systems.

This filter is suited for residential forced-air furnaces, central air handlers, and light commercial package units. The MERV 10 rating targets mid-range particulates including dust, pollen, mold spores, and fine debris. With a maximum airflow rating of 1,050 CFM and a maximum face velocity of 300 feet per minute (FPM), it fits standard 1-inch filter slots found across a broad range of air-handling equipment. It is rated for use with any unit accepting a nominal 16 x 25 x 1 inch filter.

Key Features

• MERV 10 filtration with 55% particle capture efficiency per ASHRAE 52.2-2012
• Wire-backed pleated synthetic media maintains pleat shape and maximizes surface area under load
• Rigid paperboard frame prevents filter bypass and holds dimensional tolerance
• Rated to 1,050 CFM with a maximum face velocity of 300 FPM
• Low initial resistance of 0.20 inches w.g. at 300 FPM limits static pressure impact on system performance
• Maximum operating temperature of 200 degrees F; UL 900 listed

Compatibility

Designed for use with any forced-air HVAC unit accepting a nominal 16 x 25 x 1 inch filter slot. Verify actual opening dimensions against the filter actual size of 15-1/2 x 24-1/2 x 3/4 inches before installation.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified maintenance personnel. Always shut down the air handler or furnace at the disconnect or thermostat before removing the old filter. Confirm airflow direction arrow on the filter frame aligns with system airflow toward the blower. Inspect the filter housing for gaps or damage that could allow air bypass around the filter frame.