Pro-source PRO10405 Pleated Air Filter Merv 8 10x24x1

Product Description

The PRO-SOURCE PRO10405 is a MERV 8 pleated air filter designed for standard residential and light commercial HVAC air-handling applications. Measuring 10 x 24 x 1 inches nominal with actual dimensions of 9-3/8 x 23-3/8 x 3/4 inches, this filter uses a wire-backed synthetic media construction supported by a rigid paperboard frame. It achieves 35% particle capture efficiency and is rated for airflow up to 625 CFM at a maximum face velocity of 300 feet per minute. The initial resistance is 0.14 inches water gauge at 300 FPM, and the final resistance is 1.0 inch water gauge. It meets ASHRAE 52.2-2012 and UL 900 standards.

This filter is suited for use in any forced-air system requiring a 10 x 24 x 1 nominal filter slot. Typical applications include residential furnaces, air handlers, and packaged HVAC units operating in standard-duty environments. The wire-backing provides structural support to prevent media collapse at rated airflow conditions, making it appropriate for units with higher static pressure draws. It operates in environments up to 200 degrees F, covering the full range of typical forced-air heating and cooling systems.

Key Features

• MERV 8 rating with 35% particle capture efficiency per ASHRAE 52.2-2012
• Wire-backed synthetic pleated media resists collapse at rated airflow
• Rigid paperboard frame provides dimensional stability during installation
• Rated for up to 625 CFM and 300 FPM maximum face velocity
• Maximum operating temperature of 200 degrees F
• UL 900 listed filter media

Compatibility

Designed for use with any forced-air HVAC unit accepting a 10 x 24 x 1 inch nominal filter. Verify the actual filter slot dimensions against the actual filter size of 9-3/8 x 23-3/8 x 3/4 inches before installation.

Installation Notes

Filter replacement is a standard HVAC maintenance task performed by licensed technicians or knowledgeable end users. Always power down the air-handling unit before removing or installing the filter. Install with the airflow arrow on the frame pointing toward the blower and away from the return air stream. Do not operate the system with a damaged or missing filter, as unfiltered air can foul heat exchanger and coil surfaces.