Pro-source PRO10392 Pleated Air Filter 25x25x2 Merv 8

Product Description

The PRO-SOURCE PRO10392 is a wire-backed pleated air filter rated MERV 8 with 35% particle capture efficiency. It measures 25 x 25 x 2 inches nominal (24.5 x 24.5 x 1.75 inches actual) and is built with a synthetic filter media and an integrated paperboard frame. The wire backing supports the pleated media against airflow, maintaining filter shape and efficiency across the service life. Rated for a maximum velocity of 500 feet per minute and a maximum airflow of 1,625 CFM, this filter suits high-volume residential and light commercial air handling applications. Licensed HVAC technicians and facilities maintenance professionals are the primary installers.

The PRO10392 is designed for use with any forced-air HVAC unit accepting a 25 x 25 x 2 inch filter. Typical installations include rooftop units, air handlers, and furnaces where a MERV 8 filter meets the filtration requirement. At MERV 8, the filter captures a broad range of common airborne particles including dust, pollen, mold spores, and lint. It performs within systems requiring moderate filtration without excessive static pressure drop, making it suitable for both residential and light commercial applications where airflow balance is a priority.

Key Features

• MERV 8 rating with 35% particle capture efficiency per ASHRAE 52.2-2012
• Wire-backed pleated synthetic media maintains pleat geometry under airflow
• Nominal size 25 x 25 x 2 inches; actual size 24.5 x 24.5 x 1.75 inches
• Rated to 500 FPM maximum velocity and 1,625 CFM maximum airflow
• Integrated paperboard frame for secure fit in standard filter tracks
• Rated for use up to 200 degrees F; meets UL 900 and ASHRAE 52.2-2012 standards

Compatibility

Designed for use with any forced-air HVAC unit accepting a 25 x 25 x 2 inch nominal filter slot. Verify actual opening dimensions against the 24.5 x 24.5 x 1.75 inch actual size before installation.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified maintenance personnel. Power down the air handling unit at the disconnect before removing the existing filter. Insert the filter with the airflow arrow on the frame oriented toward the blower. Follow equipment manufacturer guidelines and local codes for filter replacement intervals; initial resistance is 0.20 inches water gauge at 500 FPM, with a final resistance of 1.0 inch water gauge.