Pro-source KUN0010035 40 Micron Sintered Bronze Filter Element

Product Description

The PRO-SOURCE KUN0010035 is a 40-micron sintered bronze filter element designed for intermediate and standard filter housings. Sintered bronze media provides consistent pore structure across the filter surface, delivering reliable particulate removal at the rated micron level. This element traps contaminants in compressed air, pneumatic, and fluid systems to protect downstream equipment from wear and damage. At 1.59 inches tall and 1.1 inches in diameter, it is a compact replacement element suited for service work on production lines, maintenance benches, and mechanical rooms. Licensed tradespeople and maintenance technicians performing filter element changeouts will find this a direct drop-in service part.

This filter element fits intermediate and standard filter housings that accept sintered bronze media rated at 40 microns. It is commonly installed in compressed air preparation assemblies, point-of-use filtration stations, and pneumatic circuit maintenance applications found in light industrial, commercial mechanical, and manufacturing environments. The small form factor makes it appropriate for space-constrained filter bodies where larger elements will not fit. Always confirm housing compatibility by cross-referencing the housing manufacturer specification before installation.

Key Features

• 40-micron sintered bronze media provides consistent, repeatable filtration across the element surface
• Sized for intermediate and standard filter housings at 1.59 inches height and 1.1 inches width
• Sintered construction resists media migration, keeping captured contaminants retained in the element
• Lightweight at 0.08 pounds, minimizing added load on the filter housing assembly
• Single-unit packaging suits service and maintenance applications requiring one element per job

Compatibility

Designed as a replacement filter element for intermediate and standard filter housings that accept sintered bronze media with a 40-micron rating. Confirm housing model acceptance of this element size before installation.

Installation Notes

Filter element replacement should be performed by a qualified technician familiar with the pneumatic or fluid system being serviced. Depressurize and isolate the filter housing completely before removing the bowl or accessing the element. Inspect housing seals and O-rings during changeout and replace any that show wear or deformation. Follow the equipment manufacturer service interval recommendations and applicable facility safety procedures when returning the system to service.