Pro-source HX2AM-H-NCC Air Actuated Motor 0.93 Hp

Product Description

The PRO-SOURCE HX2AM-H-NCC is an air-actuated vane motor rated at 0.93 horsepower with a maximum speed of 3000 RPM and a minimum speed of 350 RPM. It operates on compressed air at a maximum working pressure of 100 psi and delivers up to 1.5875 foot-pounds of torque. The motor runs in a single counterclockwise direction and features a flat shaft measuring 1.14 inches in length and 9/20 inch in diameter. With a foot-mount configuration and a 1/4-inch NPT inlet thread, it fits common pneumatic tooling and equipment installations. Pneumatic system technicians and industrial maintenance professionals are the typical installers of this unit.

This motor is suited for industrial and trade applications where compressed-air drive is required and electrical power is impractical or unavailable. The counterclockwise single-direction rotation makes it appropriate for equipment designs that require consistent rotational orientation. The foot-mount style allows it to be bolted directly to a base or frame. At 5.07 pounds, the unit is compact relative to its power output, with an overall diameter of 3.94 inches and an overall length of 5.28 inches, fitting into moderate-footprint machinery and conveyor-drive assemblies.

Key Features

• 0.93 HP output with a 3000 RPM maximum and 350 RPM minimum speed range
• 100 psi maximum working pressure with 1/4-inch NPT threaded air inlet
• Counterclockwise single-direction rotation with a flat-style output shaft
• Foot-mount style for direct base or frame installation
• 4-vane internal design for smooth pneumatic operation
• Compact 3.94-inch diameter profile at 5.07 pounds

Compatibility

Designed as an OEM-style pneumatic vane motor replacement for foot-mount compressed-air drive applications requiring a counterclockwise 0.93 HP motor with a 1/4-inch NPT inlet.

Installation Notes

Installation should be performed by a qualified pneumatic systems technician or industrial maintenance professional. Depressurize the air supply and bleed any residual line pressure before disconnecting or mounting the motor. Verify that supply air is clean, dry, and lubricated per the equipment manufacturer's requirements, as contaminated air supply reduces vane motor service life. Secure all fittings to the 1/4-inch NPT port with appropriate thread sealant and confirm correct rotational direction before returning the system to service.