Pro-source CED8209-FSB Fan Speed Control 2-speed 115V

Product Description

The PRO-SOURCE CED8209-FSB is a two-speed fan speed control designed for single-phase fan motor applications operating at 115 volts. Rated at 1.5 amps, this control unit manages motor speed switching in residential and light commercial ventilation and HVAC systems. It is a direct replacement-style control intended for installations where two discrete fan speed settings are required. HVAC technicians and electricians install this type of control when servicing or replacing speed-selector components in air handlers, fan coil units, and similar equipment. The compact form factor supports straightforward panel or enclosure mounting in space-constrained installations.

This fan speed control is suited for single-phase, 115-volt fan motor circuits requiring two-speed operation. Typical applications include residential air handlers, fan coil units, and ventilation equipment where low and high speed selections are controlled at the unit level. The 1.5-amp rating is appropriate for small fractional-horsepower fan motors commonly found in these systems. Licensed HVAC technicians and electricians performing maintenance or component-level repairs are the primary installers of this control.

Key Features

• Two discrete speed settings for flexible fan motor control
• 115-volt rated for standard single-phase residential and light commercial circuits
• 1.5-amp rating suitable for fractional-horsepower fan motors
• Compact 1 x 1 x 1 inch package dimensions for space-constrained enclosures
• Replacement-style design for straightforward swap-out during service calls

Compatibility

Designed as an OEM-style replacement fan speed control for single-phase, 115-volt fan motor applications requiring two-speed operation in residential and light commercial HVAC and ventilation systems.

Installation Notes

Installation should be performed by a licensed HVAC technician or electrician in accordance with applicable NEC requirements. Disconnect and lock out all power to the unit before removing the existing control or making any wiring connections. Verify that the circuit voltage and amperage do not exceed the control ratings of 115 volts and 1.5 amps before energizing. Do not use this control on three-phase circuits or with motors that exceed the rated amperage.