Pro-source CED4013N Industrial Circulation Fan 30in 9850 Cfm

Product Description

The PRO-SOURCE CED4013N is a 30-inch industrial circulation fan designed for high-volume air movement in commercial and industrial environments. Running on 115 volts and drawing 5.6 amps, this fan delivers 9,850 CFM at high speed and 7,500 CFM at low speed, making it well-suited for facilities that require sustained airflow across large open areas. The two-speed motor rated at 1/2 HP gives technicians and facility managers the flexibility to match airflow output to ambient conditions. The fixed-head design mounts without oscillation, directing airflow in a set direction for targeted circulation. Industrial maintenance professionals and HVAC service contractors are the typical installers.

The CED4013N is built for industrial and commercial circulation applications such as warehouses, manufacturing floors, garages, agricultural buildings, and large workshop spaces. The 30-inch blade diameter and high CFM output make it appropriate for wide-open floor plans where smaller fans cannot move adequate air volume. Its two-speed capability allows operators to run at 7,500 CFM during moderate conditions and step up to 9,850 CFM when maximum airflow is required. This fan operates as a standalone circulation unit and is not designed for ducted or forced-air HVAC systems.

Key Features

• 30-inch blade diameter for high-volume industrial air circulation
• Dual-speed operation: 9,850 CFM at high speed, 7,500 CFM at low speed
• 1/2 HP motor rated at 115 volts and 5.6 amps
• Fixed head design with no oscillation for directed airflow
• Weighs 48 pounds for stable floor or mount installation

Compatibility

Designed as an OEM-style industrial circulation fan for use in commercial and industrial ventilation applications requiring a 30-inch, 2-speed, 115-volt fan unit.

Installation Notes

Installation should be performed by a qualified electrician or industrial maintenance technician familiar with NEC requirements for motor-driven equipment. Disconnect and lock out power at the circuit before making any electrical connections. Verify that the supply circuit is rated for at least 5.6 amps continuous load at 115 volts before energizing the unit. Ensure the mounting surface or stand is capable of supporting a minimum of 48 pounds and that airflow clearances are maintained per the manufacturer guidelines.