Pro-source 90380000709 Pvc 45 Elbow 3 in Sch 80

Product Description

The PRO-SOURCE 90380000709 is a 3-inch Schedule 80 PVC 45-degree elbow fitting used to change flow direction in pressure-rated plastic piping systems. Built from rigid PVC with slip x slip end connections, this elbow accepts solvent-welded joints on both ends. Schedule 80 wall thickness provides greater pressure resistance and impact strength compared to Schedule 40, making it appropriate for demanding plumbing, industrial, and chemical-handling applications. Licensed plumbers and pipefitters install this type of fitting in both above-ground and buried runs where a 45-degree directional change is required. The fitting weighs 1.84 pounds and meets typical dimensional standards for 3-inch PVC pressure fittings.

This 45-degree elbow is suited for residential and commercial plumbing systems, irrigation distribution, industrial process piping, and chemical drainage lines where PVC material is code-acceptable. Slip connections require solvent cement application to both the fitting socket and pipe end before assembly. The Schedule 80 rating makes this fitting a common choice for higher-pressure runs or installations where pipe is exposed to mechanical contact or UV degradation protection is handled separately. It is typically used wherever a gradual 45-degree offset is preferable to a sharp 90-degree turn to reduce turbulence and pressure drop in the line.

Key Features

• Schedule 80 PVC wall thickness for elevated pressure ratings versus Schedule 40
• Slip x slip end connections accept solvent-cement pipe joining on both ends
• 3-inch fitting size fits standard 3-inch PVC pressure pipe
• 45-degree angle provides a less abrupt directional change than 90-degree elbows
• Rigid PVC construction resists corrosion and most common chemicals

Compatibility

Designed as an OEM-style replacement and standard-use fitting compatible with 3-inch Schedule 80 PVC pressure piping systems using solvent-cement slip connections.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code and applicable local codes. Depressurize and drain the piping system fully before cutting into an existing line. Apply a compatible PVC primer and Schedule 80-rated solvent cement to both the pipe end and fitting socket, joining quickly and holding firm for the manufacturer-recommended cure time before restoring pressure. Do not use this fitting with threaded or push-fit connections without appropriate adapters.