Pro-source 90341500509 Cpvc Pipe Union 2 in Sch 80

Product Description

The PRO-SOURCE 90341500509 is a 2-inch Schedule 80 CPVC pipe union designed for joining and disconnecting pressurized piping runs without cutting pipe. The union uses an EPDM O-ring seal at the mating face to provide a reliable, leak-resistant connection. Slip x Slip end connections allow the fitting to be solvent-welded directly onto plain-end CPVC pipe. This fitting weighs 1.49 pounds and is suited for chemical handling, industrial process lines, and potable water systems where higher pressure ratings and corrosion resistance are required. Licensed plumbers and pipefitters typically install Schedule 80 CPVC unions in both new construction and retrofit applications.

Schedule 80 CPVC unions are used in residential and commercial plumbing systems, chemical distribution lines, and pool or spa circulation piping where the ability to break a joint for maintenance or equipment removal is needed. The Slip x Slip configuration is standard for solvent-cement installation on CPVC systems operating at elevated temperatures and pressures. This union is sold as a single unit and is appropriate wherever a 2-inch CPVC union with an EPDM O-ring seat is specified.

Key Features

• 2-inch fitting size for standard CPVC piping systems
• Schedule 80 wall thickness for higher pressure and temperature service
• EPDM O-ring provides a positive, leak-resistant seal at the union joint
• Slip x Slip end connections for solvent-cement installation
• CPVC material offers corrosion resistance suitable for chemical and potable water service

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 2-inch Schedule 80 CPVC piping systems using slip-fit solvent-cement connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable IPC or local plumbing code requirements. Depressurize and drain the system fully before removing or installing any union fitting. Use only CPVC-rated solvent cement and primer on the slip connections, following the cement manufacturer's cure time before returning the system to service. Do not over-torque the union nut; hand-tighten and verify the O-ring is seated properly before pressurizing.