Pro-source 90340100709 Cpvc 90 Elbow 3 in Sch 80

Product Description

The PRO-SOURCE 90340100709 is a 3-inch Schedule 80 CPVC 90-degree elbow designed for pressure piping systems handling corrosive or high-temperature fluids. Manufactured from chlorinated polyvinyl chloride, this fitting delivers the wall thickness and pressure rating required for demanding industrial and commercial plumbing applications. Slip x Slip end connections accept solvent-cement joining to create a permanent, leak-free joint. At 2.52 pounds, it is a solid, full-bodied fitting suitable for above-ground and in-wall installations where standard Schedule 40 fittings are not rated for the service conditions.

This elbow is used wherever a piping run must make a 90-degree direction change in a Schedule 80 CPVC system. Typical applications include chemical process piping, hot and cold water distribution in industrial facilities, plating lines, and commercial mechanical rooms. It is commonly installed by licensed plumbers and pipefitters working on systems that convey corrosive liquids, chlorinated water, or high-temperature service lines where CPVC is the specified material.

Key Features

• Schedule 80 wall thickness provides higher pressure ratings compared to Schedule 40 fittings of the same size
• CPVC material resists corrosion, chemical attack, and elevated service temperatures
• Slip x Slip end connections for solvent-cement joining — no threading required
• 3-inch fitting size suits main distribution lines and larger branch connections
• 90-degree turn geometry allows compact direction changes in tight mechanical spaces

Compatibility

Designed as an OEM-style replacement or new-installation fitting for Schedule 80 CPVC piping systems using 3-inch nominal pipe with slip-joint solvent-cement connections.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local plumbing codes and ASTM D2846 or ASTM F441 standards for CPVC piping. Depressurize and drain the piping system fully before cutting into any existing line. Use only CPVC-rated solvent cement and primer — do not substitute PVC cement, as it is not formulated for CPVC chemistry. Allow full cure time per the cement manufacturer instructions before returning the system to pressure.