Pro-source 875-030C Cpvc Pipe Wye 3 in Sch 80 Slip

Product Description

The PRO-SOURCE 875-030C is a 3-inch CPVC pipe wye fitting manufactured to Schedule 80 wall thickness standards. This wye provides a branch outlet at an angle from the main pipeline run, allowing flow to be diverted or combined within a pressurized system. The slip end connections accept solvent-welded CPVC pipe on all three openings. Weighing 3.56 pounds, the fitting is built for heavier-duty service than standard Schedule 40 components. Plumbers and pipefitters working on industrial, commercial, or high-temperature domestic systems install this fitting where a wye junction is required in a CPVC piping network.

This fitting is suited for Schedule 80 CPVC piping systems used in chemical processing, industrial plumbing, hot and cold water distribution, and other applications where higher pressure ratings or resistance to corrosive fluids is required. The 3-inch size handles main-line and branch-line runs common in commercial mechanical rooms and process piping installations. Solvent cement joining keeps installation straightforward for qualified plumbing professionals familiar with CPVC systems.

Key Features

• Schedule 80 wall thickness for higher pressure ratings compared to Schedule 40
• CPVC material offers resistance to corrosion, scale, and a wide range of chemicals
• Slip end connections on all three openings for solvent-cement joining
• 3-inch fitting size suitable for main-line commercial and industrial branch connections
• Wye configuration allows smooth directional flow transitions within the pipeline

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 3-inch Schedule 80 CPVC piping systems using slip-style solvent-cement connections.

Installation Notes

Installation should be performed by a licensed plumber following applicable IPC and local plumbing code requirements. Depressurize and drain the system completely before cutting into any existing line. Use only CPVC-rated solvent cement and primer, and follow manufacturer cure times before pressurizing the joint. Do not use this fitting with PVC pipe or PVC-rated cement, as the materials and solvents are not interchangeable.