Pro-source 806-020 Pvc Sch 80 90 Elbow 2 in Slip

Product Description

The PRO-SOURCE 806-020 is a 2-inch PVC Schedule 80 90-degree elbow fitting designed for pressure piping systems that demand greater wall thickness and impact resistance than Schedule 40. It features slip x slip end connections, accepting solvent-welded pipe on both ends for a permanent, leak-resistant joint. This fitting is used in industrial, commercial, and residential plumbing and fluid-handling systems where chemical resistance, durability, and pressure performance are required. Licensed plumbers and pipefitters are the typical installers of Schedule 80 fittings in these applications.

This 90-degree elbow is suited for directional changes in 2-inch PVC pressure piping runs. Common applications include chemical transfer lines, irrigation systems, industrial process piping, and commercial plumbing drain and supply configurations that specify Schedule 80 fittings. The slip x slip connection style is compatible with standard 2-inch PVC pipe, joined using PVC primer and solvent cement per manufacturer and code requirements.

Key Features

• Schedule 80 wall thickness for higher pressure ratings and added durability compared to Schedule 40
• Slip x Slip end connections for solvent-welded, permanent joints
• PVC construction offers resistance to corrosion and a wide range of chemicals
• 90-degree turn geometry for right-angle direction changes in piping runs
• 2-inch fitting size for direct compatibility with standard 2-inch PVC pipe

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 2-inch Schedule 80 PVC pressure piping systems using solvent-weld slip connections.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with local plumbing codes and ASTM standards for PVC pressure piping. Shut off and depressurize the piping system completely before cutting into any existing line. Use the appropriate PVC primer and solvent cement rated for Schedule 80 fittings, and allow full cure time before returning the system to service. Do not apply heat or use threaded connections on slip-end fittings.