Pro-source 4827100215PRO Air Flow Control Valve 5/32 in

Product Description

The PRO-SOURCE 4827100215PRO is a right-angle air flow control valve designed to regulate compressed air flow in pneumatic lines and control circuits. The valve accepts a 5/32-inch tube outside diameter and connects to a 1/8-inch male thread port, making it a compact inline solution for throttling air supply or exhaust in directional control applications. At 0.031 pounds, this is a lightweight fitting-style component suited for tight panel or manifold installations. Licensed HVAC technicians, pneumatic system integrators, and industrial maintenance professionals are the typical installers of this valve type.

This right-angle flow control valve is used in pneumatic control systems where a 90-degree tube-to-port connection is required. Typical applications include air logic circuits, actuator speed control, and instrument air systems in both light commercial and industrial settings. The right-angle body profile is particularly useful in space-constrained enclosures or when routing tubing parallel to a mounting surface. The 1/8-inch male thread end allows direct installation into standard NPT or BSPT ports on actuators, manifolds, or solenoid valve bodies.

Key Features

• Right-angle body routes 5/32-inch tubing at 90 degrees to the threaded port for compact routing
• 5/32-inch tube OD push-in or compression connection for quick, secure tubing attachment
• 1/8-inch male thread end fits standard pneumatic actuator and manifold ports
• Lightweight construction at 0.031 pounds minimizes load on tubing and fittings
• Compact dimensions (1.22 inches height, 0.90 inches length, 0.39 inches width) suit tight installations

Compatibility

Designed as an OEM-style replacement or retrofit flow control valve for pneumatic systems requiring a 5/32-inch tube OD connection with a 1/8-inch male thread port.

Installation Notes

Depressurize the pneumatic system fully before removing or installing any flow control valve. Use appropriate thread sealant on the male thread end per system requirements, and avoid overtightening to prevent damage to the valve body or mating port. This type of valve is typically installed by qualified pneumatic technicians or maintenance personnel familiar with compressed air circuit design. Verify flow direction markings on the valve body before final installation to ensure correct needle or check orientation.