Pro-source 2810055010PRO Hose Reel 1/2 in 50 Ft Spring Retractable

Product Description

The PRO-SOURCE 2810055010PRO is a spring-retractable hose reel supplied with a 50-foot rubber hose rated for air and water service. The open-style steel reel retracts the hose automatically after use, reducing clutter and wear in active shop or service environments. The hose measures 0.5 inches inside diameter and is rated to 300 psi maximum working pressure. Inlet and outlet connections are both 1/2 NPT. The unit handles temperatures from -22 degrees F to 158 degrees F, making it suitable for year-round use in both indoor and outdoor installations. At 54 pounds, the reel is built for permanent wall or ceiling mounting. HVAC technicians, plumbers, and general mechanical shops are the primary installers.

This hose reel is designed for workshop, garage, and light-industrial service bays where a reliable retractable air or water hose is needed at a fixed station. The open-reel design allows easy inspection and cleaning of the hose. The red rubber hose and gray steel reel body are standard for air and water supply drops in commercial and residential service environments. The 1/2 NPT connections integrate directly into standard compressed-air distribution lines or cold-water supply lines without adapters.

Key Features

• Spring-retractable drive automatically rewinds the hose after each use
• 50-foot red rubber hose included, rated to 300 psi working pressure
• 1/2 inch ID hose with 1/2 NPT inlet and 1/2 NPT outlet connections
• Open-reel steel construction in gray finish allows visual inspection of hose condition
• Operating temperature range of -22 degrees F to 158 degrees F suits most service environments
• Suitable for both air and water applications

Compatibility

Designed for use on compressed-air distribution systems and cold-water supply lines where a 1/2 NPT connection and 300 psi pressure rating are required.

Installation Notes

Installation is typically performed by a licensed plumber, pipefitter, or HVAC technician. Shut off the air or water supply at the source before making connections. Mount the reel to a structural wall or ceiling joist capable of supporting the combined weight of the unit and a filled hose. Thread connections should be sealed with PTFE tape or pipe thread compound per applicable plumbing or mechanical codes before pressurizing the line.