Pro-source 200049650 Rotating Sewer Nozzle 3000 Psi

Product Description

The PRO-SOURCE 200049650 is a rotating sewer pressure washer nozzle built for drain and sewer line cleaning applications. Rated to a maximum of 3,000 psi, it features a 5.5mm orifice diameter and a 1/8 inch female pipe thread (FPT) connection. The nozzle body is polished stainless steel, providing corrosion resistance in wet, debris-heavy environments. The rotating action drives the nozzle forward through the line while simultaneously blasting the pipe walls, making it effective for clearing grease, scale, and debris. It is sized for use with standard sewer jetting hoses and small-to-mid-range pressure washer units.

This nozzle is suited for plumbers, drain cleaning technicians, and sewer service professionals working on residential and light commercial drain lines. The 1/8 inch FPT inlet connects to standard sewer jetting hose fittings used with electric or gas-powered pressure washers. Typical applications include clearing blocked floor drains, lateral sewer lines, and grease traps. The compact size and rotating nozzle style make it a practical tool for lines where forward propulsion and 360-degree wall coverage are both required.

Key Features

• Rotating nozzle style provides forward propulsion and simultaneous sidewall cleaning
• Rated to 3,000 psi maximum working pressure
• 5.5mm orifice diameter for controlled water flow and jetting force
• 1/8 inch FPT inlet connection fits standard sewer jetting hose assemblies
• Polished stainless steel construction resists corrosion in sewer environments

Compatibility

Designed as an OEM-style replacement or service nozzle for pressure washer sewer jetting setups utilizing a 1/8 inch FPT hose connection and rated for operation up to 3,000 psi.

Installation Notes

Installation is typically performed by licensed plumbers or drain cleaning technicians. Before connecting or replacing the nozzle, relieve all pressure from the jetting hose and shut off the pressure washer unit completely. Use appropriate thread sealant or tape on the FPT connection and hand-tighten before applying tool torque to avoid cross-threading the stainless steel fitting. Always verify that the pressure washer output rating does not exceed the 3,000 psi maximum rating of this nozzle before operation.