Pro-safe PS-CBLM30B Self-retracting Lifeline 310 Lb 30 Ft

Product Description

The PRO-SAFE PS-CBLM30B is a 30-foot self-retracting lifeline (SRL) designed for fall protection on construction sites, industrial rooftops, and elevated work platforms. It uses a 3/16-inch diameter galvanized steel cable that automatically retracts and locks under sudden load, limiting fall distance and arrest forces. The harness connection is a swivel locking snap hook with a built-in load indicator, which gives the installer a visible confirmation of post-fall loading. The anchorage and unit connector is a self-locking carabiner. Rated to 310 pounds, this SRL meets OSHA standards and carries ANSI Z359.14-2014 Class A and ANSI A10.32-2012 compliance ratings. It is installed by safety-qualified workers, competent persons, or contractors operating under a site fall protection plan.

The PS-CBLM30B is suited for single-leg fall arrest applications where a worker requires up to 30 feet of working range from a fixed overhead anchorage point. Typical installations include steel erection, roofing, tower work, and general construction at height. The slip-on, no-strap design allows it to connect directly to a compatible dorsal D-ring on a full-body harness without additional hardware. Its galvanized steel cable resists corrosion in outdoor and light industrial environments. The metallic and black finish is standard for this model.

Key Features

• 30-foot galvanized steel cable with 3/16-inch diameter for durability and corrosion resistance
• 310-pound capacity rated for single-leg fall arrest use
• Swivel locking snap hook harness connector with integrated load indicator signals post-fall engagement
• Self-locking carabiner anchorage connector on both unit and anchorage connection points
• Meets OSHA requirements and ANSI Z359.14-2014 Class A and ANSI A10.32-2012 standards
• Single-leg design with slip-on connection — no additional straps required

Compatibility

Designed as a single-leg self-retracting lifeline for use with full-body harnesses equipped with a dorsal D-ring connection point, in applications meeting OSHA and ANSI Z359.14-2014 Class A fall protection requirements.

Installation Notes

Installation and inspection must be performed by a competent person as defined by OSHA 29 CFR 1926 Subpart M fall protection standards. Before connecting, verify the anchorage point is rated for fall arrest loads and that the harness dorsal D-ring is properly donned and adjusted. Do not use this SRL as a positioning or restraint device — it is rated for fall arrest only. After any fall event, retire the unit from service and inspect per ANSI Z359.14-2014 guidelines before returning any component to use.