Pro-safe 30-PRO-4RWCHVRED Floor Aisle Marking Tape 4in 30mil

Product Description

The PRO-SAFE 30-PRO-4RWCHVRED is a heavy-duty floor aisle marking tape designed for industrial and commercial facility safety applications. Made from PVC (polyvinylchloride) with a polyvinylchloride adhesive backing, this tape measures 4 inches wide, 100 feet long, and 30 mil thick. The striped red and white pattern provides high-visibility lane and aisle delineation on warehouse, shop, and facility floors. At 11 pounds, the roll is substantial enough for extended continuous runs without frequent repositioning. It is installed by facility safety managers, maintenance technicians, and general contractors responsible for OSHA-compliant floor marking programs.

This tape is suited for heavy-duty traffic areas where durable, long-lasting floor markings are required. Typical applications include warehouse aisle lanes, manufacturing cell boundaries, pedestrian walkway delineation, and hazard zone marking in industrial facilities. The non-anti-slip surface is appropriate for areas where floor marking visibility is the primary requirement rather than traction enhancement. The red and white striped color scheme is commonly used to indicate caution zones, restricted areas, or active traffic lanes per facility safety plans.

Key Features

• Heavy-duty PVC construction handles high foot and equipment traffic
• 30 mil thickness provides durability and resistance to peeling at edges
• 4 inches wide for clear, visible aisle and lane delineation
• 100-foot roll length covers extended runs with minimal seams
• Red and white striped pattern for high-visibility hazard or aisle marking
• Polyvinylchloride adhesive backing for firm floor adhesion

Compatibility

Designed as a general-purpose floor aisle marking tape for use on smooth, clean concrete, sealed concrete, and hard-surface industrial flooring where standard PVC marking tape is appropriate.

Installation Notes

Installation is typically performed by maintenance technicians or safety personnel. The floor surface must be clean, dry, and free of dust, oil, and debris before application to ensure proper adhesion. Use a roller or squeegee tool to press the tape firmly and eliminate air pockets along the full length of the run. Allow adequate cure time before resuming foot or equipment traffic over the marked area, following the facility safety program or applicable OSHA floor marking guidelines.