Pro-lube BORP/31-30 Air Operated Oil Pump 3.7 Gpm

Product Description

The PRO-LUBE BORP/31-30 is an air operated oil pump designed for dispensing medium to high viscosity oils, including grades up to SAE 130, from drum and pail containers. Operating on a 3:1 pump ratio, it delivers a flow rate of 3.7 GPM and handles a maximum operating pressure of 150 psi. Construction materials include steel, brass, aluminum, zinc, hi nitrile rubber, polyurethane, and Turcite, giving the pump broad chemical compatibility across petroleum-based lubricants. Licensed lubrication and fleet service technicians are the primary installers in shop, fleet, or industrial maintenance environments.

The BORP/31-30 is suited for stationary or portable oil dispensing setups in commercial garages, fleet maintenance bays, and industrial facilities. It is sized for use with 30-liter containers and is compatible with containers in the 40 to 399.9 pound range. Typical applications include engine oil, gear oil, and other medium to high viscosity petroleum lubricants. The unit is not rated for use with corrosive media and should not be applied outside its specified fluid compatibility range.

Key Features

• 3.7 GPM flow rate for efficient bulk oil transfer
• 3:1 pump ratio suitable for medium to high viscosity oils up to SAE 130
• 150 psi maximum operating pressure for reliable air-driven performance
• Multi-material construction: steel, brass, aluminum, zinc, hi nitrile rubber, polyurethane, and Turcite
• 1/4 NPTF intake thread and 1/4 NPT (F) air inlet for standard shop air connections
• Designed for 30-liter containers, compatible with 40 to 399.9 pound container range

Compatibility

Compatible with medium to high viscosity oils up to SAE 130 in 30-liter containers and containers in the 40 to 399.9 pound size range. Not for use with corrosive media.

Installation Notes

Installation is typically performed by a lubrication technician or qualified maintenance professional. Depressurize the air supply line before connecting or disconnecting the pump. Verify that the air inlet and intake connections are properly threaded and sealed to 1/4 NPT standards before applying air pressure. Confirm fluid compatibility before placing the pump into service, and never use this pump with corrosive media.