Prime Wire Cable TNI2412 Indoor Electromechanical Timer

Product Description

The PRIME WIRE CABLE TNI2412 is a 125-volt indoor electromechanical timer designed for single-outlet, 24-hour repeating cycle control. It operates on a mechanical pin-based programming system with 30-minute intervals, offering up to 48 individual on/off setting options within each 24-hour period. The angled housing positions the dial face for easier reading and programming without removing the unit from the outlet. An on/off override switch allows instant manual bypass of the programmed schedule. Electricians and general contractors install this type of timer for lighting automation, seasonal display control, and equipment cycling in residential and light commercial settings.

The TNI2412 is suited for indoor use with standard 125-volt outlets. It is compatible with CFL, LED, and incandescent lighting loads. Typical applications include controlling table lamps, floor lamps, and similar plug-in lighting fixtures on a daily automated schedule. The 30-minute interval increments make it practical for straightforward daily on/off routines where precision to the half-hour is sufficient. The compact, single-outlet form factor fits standard wall receptacles without blocking adjacent outlets in most configurations.

Key Features

• 24-hour repeating cycle with up to 48 programmable settings per day
• 30-minute interval push-down pins for simple, tactile programming
• On/off override switch for instant manual bypass without reprogramming
• Patented angled housing improves dial readability at the outlet
• Compatible with CFL, LED, and incandescent lamp loads
• Single-outlet design rated at 125 volts for indoor use

Compatibility

Compatible with CFL, LED, and incandescent lighting loads on standard 125-volt indoor outlets. Designed as a direct plug-in timer for residential and light commercial lighting control applications.

Installation Notes

Installation requires no tools — the unit plugs directly into a standard grounded indoor outlet. Before programming, verify the outlet and any connected load are de-energized or in a safe state per local electrical code. The connected load should not exceed the rated capacity of the timer; confirm load amperage before use. This product is rated for indoor use only and should not be installed in wet or damp locations.