Prime-line U 9595 Door Lock Reinforcement Plate

Product Description

The PRIME-LINE U 9595 is a non-recessed door lock reinforcement plate designed to strengthen the latch zone of entry doors against forced entry. Constructed from stainless steel with a stainless steel finish, this reinforcer plate installs over the existing lock bore area to add structural resistance at one of the most vulnerable points on any door. It features two 2-1/8 inch bores spaced 3-5/8 inches on center and accommodates a 2-3/4 inch backset. The plate is pre-punched for mounting, and all necessary hardware is included. Installation is straightforward and appropriate for both residential and light commercial entry doors made of wood or metal. Licensed locksmiths, carpenters, and general contractors typically handle this type of installation.

This reinforcement plate is specifically sized for doors that are 1-3/4 inches thick. It works with mortise-style latches and drive-in latches. The plate is suited for single entry doors in residential settings where added resistance to kick-in or pry attacks is needed. Because it is not a universal fit, dimensions should be verified against the existing door prep before ordering. It is compatible with both wood and metal door construction, making it a practical option for a range of standard entry door configurations.

Key Features

• Non-recessed design reinforces the latch area without requiring door modification beyond existing bore holes
• Stainless steel construction with stainless steel finish for corrosion resistance and durability
• Pre-punched plate with all mounting hardware included for a direct installation
• Two 2-1/8 inch bores on 3-5/8 inch centers with 2-3/4 inch backset - fits standard mortise and drive-in latch preps
• Compatible with both wood and metal entry doors
• Designed for 1-3/4 inch door thickness - not a universal fit

Compatibility

Designed for 1-3/4 inch thick entry doors equipped with mortise or drive-in latches featuring two bores on 3-5/8 inch centers with a 2-3/4 inch backset. Not universal - verify door dimensions and bore layout before installation.

Installation Notes

Power tools are not typically required, but a screwdriver and drill may be needed depending on door material and existing hardware condition. Always verify bore spacing and backset measurements against the plate dimensions before beginning work. Installers should confirm the door edge and frame condition are structurally sound, as a reinforcer plate cannot compensate for a damaged or deteriorated door frame. Consult local building codes where applicable for security hardware requirements on rated egress doors.