Precision Twist Drill 6001093 Taper Shank Drill Bit 2MT

Product Description

The PRECISION TWIST DRILL 6001093 is a taper shank drill bit designed for general-purpose drilling in metal, wood, and similar materials. It measures 0.6563 inches (21/32 inch) in diameter with a 9-inch overall length and a standard 118-degree point angle. The high-speed steel construction carries an oxide finish to reduce friction and extend tool life in moderate-duty applications. A web-thinned point reduces thrust force at the start of the cut. This bit is intended for use in drill presses, lathes, and machining centers equipped with a No. 2 Morse Taper spindle socket.

This drill bit suits machine shops, maintenance facilities, and industrial production environments where a No. 2 Morse Taper shank is the standard toolholding interface. The right-hand spiral flute and standard point geometry make it a reliable choice for through-hole and blind-hole drilling in ferrous and non-ferrous stock. It conforms to ANSI standards and falls within the Series 209 product line from PRECISION TWIST DRILL. Installation requires a compatible 2MT spindle or sleeve; no additional adapters are needed when the machine spindle matches the taper designation.

Key Features

• 0.6563 inch (21/32 inch) drill diameter for precise hole sizing
• No. 2 Morse Taper (2MT) shank fits standard drill press and lathe spindles
• 118-degree standard point angle with web-thinned tip for reduced entry thrust
• High-speed steel construction handles general-purpose drilling across common materials
• Oxide finish reduces friction and provides light corrosion resistance
• Right-hand spiral flute with regular spiral type for efficient chip evacuation
• Meets ANSI standards; Series 209 designation

Compatibility

Designed for use in any drill press, lathe, or machining center with a No. 2 Morse Taper (2MT) spindle socket. No specific OEM model compatibility was provided in the product data.

Installation Notes

Installation is performed by machinists or maintenance technicians familiar with Morse Taper tooling. Clean the taper shank and spindle socket thoroughly before seating to ensure full contact and prevent slippage. Drive the shank firmly into the socket by hand and verify seating before applying power. To remove, use the appropriate drift key through the spindle drift slot; never strike the drill body directly.