Pps 691514774374 Copper Press Pipe Tee 1x1x3/4 in

Product Description

The PPS 691514774374 is a copper press pipe tee designed for use in pressurized plumbing systems. This reducing tee connects a 1-inch run with a 3/4-inch branch outlet using a press end style, eliminating the need for open flame during installation. At 3.5 inches in length, the fitting is compact and suited for tight mechanical spaces. Plumbers and pipefitters install this type of fitting in both new construction and retrofit applications where press-style tooling is available on site.

This tee fitting is used in residential and light commercial plumbing systems where copper press connections are specified. The press end style is compatible with standard press-jaw tooling and is appropriate for hot and cold domestic water distribution systems. The reducing outlet allows a branch line to step down from a 1-inch main run to a 3/4-inch supply line, a common configuration in fixture supply and zone distribution layouts.

Key Features

• Press end style connection on all three ports — no soldering required
• Reducing configuration: 1 inch x 1 inch x 3/4 inch nominal sizing
• Copper construction for corrosion resistance in potable water systems
• Compact at 3.5 inches in length, suitable for space-constrained installs
• Compatible with standard press-jaw tooling used in commercial and residential plumbing

Compatibility

Designed as an OEM-style press fitting replacement or new-install component for copper press plumbing systems requiring a 1 x 1 x 3/4 inch reducing tee configuration.

Installation Notes

Installation must be performed by a licensed plumber using calibrated press-jaw tooling rated for copper press fittings. Shut off the water supply and depressurize the line before fitting installation. Ensure pipe ends are clean, deburred, and fully inserted to the depth mark before pressing. Verify local plumbing codes under the IPC or applicable jurisdiction for approved use of press fittings in potable water systems.