Potter Electric Signal Co. Us RMS-6T-WP-KL Pull Station

Product Description

The POTTER ELECTRIC SIGNAL CO. US RMS-6T-WP-KL is a red fire alarm pull station with white text, designed for manual fire alarm initiation in life-safety systems. Pull stations serve as the primary manual triggering device in fire alarm circuits, allowing building occupants or emergency personnel to activate the alarm system when a fire is detected. This unit is sold individually and is categorized as a pull station, making it appropriate for installation by licensed fire alarm technicians and electricians working within NFPA 72 requirements.

The RMS-6T-WP-KL is suited for applications where a clearly visible, manual fire alarm initiating device is required. The red housing with white text meets standard color conventions for fire alarm equipment in commercial and institutional settings. Typical installation scenarios include office buildings, schools, healthcare facilities, and other occupancies subject to local fire codes requiring manual pull stations at exits and along egress paths.

Key Features

• Red enclosure with white text for high-visibility identification in emergency situations
• Manual pull station design for direct occupant-initiated fire alarm activation
• Sold as a single unit for individual replacement or new installation
• Part of the POTTER ELECTRIC SIGNAL CO. US fire alarm product line

Compatibility

Designed as an OEM-style replacement or new-installation pull station for manual fire alarm initiation circuits in commercial and institutional fire alarm systems. No specific compatible model numbers were provided in the available product data.

Installation Notes

Installation must be performed by a licensed fire alarm technician or qualified electrician in accordance with NFPA 72 and all applicable local codes. De-energize the fire alarm control panel circuit before wiring the device and follow the authority having jurisdiction requirements for mounting height, which is typically between 42 inches and 54 inches above finished floor. Do not restore power to the initiating device circuit until all connections are secured and inspected. A full system functional test should be conducted after installation.