Parlec DA200-0390 Double Angle Collet DA200 25/64 in

Product Description

The PARLEC DA200-0390 is a double angle collet in the DA200 series, designed for precision workholding in CNC machining and milling operations. It accepts round shank tooling with a minimum capacity of 0.3750 inches and a maximum capacity of 0.3906 inches, making it suited for 25/64 inch shanks. The collet measures 1.187 inches in overall length and 0.539 inches in overall diameter. Machinists and tool-room technicians rely on double angle collets for their positive gripping action and repeatability under high-speed cutting loads.

This collet is used in machining centers, CNC mills, and manual milling machines equipped with DA200 collet chucks. It is appropriate for production environments and job shops where consistent tool runout and secure clamping are required. Typical applications include end milling, drilling, and reaming operations where a 25/64 inch shank tool is used. The DA200 series is a standard double angle collet format commonly found in both manual and CNC tooling setups.

Key Features

• DA200 collet series for use with compatible DA200 collet chucks
• Accepts 25/64 inch shank tooling with a capacity range of 0.3750 to 0.3906 inches
• Overall length of 1.187 inches for consistent projection and tool reach
• Overall diameter of 0.539 inches for proper seating in DA200 chuck bores
• Double angle design provides secure clamping and reduced tool pullout under load
• Lightweight at 0.04 pounds for minimal added mass in high-speed applications

Compatibility

Designed for use with DA200 series collet chucks that accept double angle collets with a 25/64 inch bore capacity.

Installation Notes

Installation is performed by a qualified machinist or toolroom technician. Ensure the spindle is fully stopped and the machine is powered down before changing collets. Clean the collet chuck bore and the collet exterior before seating to prevent runout caused by chips or debris. Tighten the collet nut to the chuck manufacturer's recommended specification using the appropriate spanner wrench.