Parlec 75PG-0125 Tg/pg 75 Single Angle Collet 0.125 in

Product Description

The PARLEC 75PG-0125 is a standard single angle collet in the TG/PG 75 series, designed for precision workholding in CNC machining and toolholding applications. It accepts a 0.125-inch tool shank and delivers a total indicator runout (TIR) of 0.0005 inches, making it suitable for close-tolerance milling, drilling, and reaming operations. The collet measures 1.844 inches in overall length with a maximum body diameter of 1.062 inches. It is installed by machinists and toolroom technicians in production and job-shop environments where repeatable concentricity is required.

This collet is intended for use in TG/PG 75 series collet chucks and toolholding systems operating in vertical or horizontal machining centers. The TG/PG 75 platform is commonly found in medium-duty production machining setups. It is suited for residential shops, commercial job shops, and industrial manufacturing environments where consistent grip and low runout are critical to part quality and tool life.

Key Features

• 0.125-inch bore accepts standard 1/8-inch round tool shanks
• TIR of 0.0005 inches for high-concentricity toolholding
• Overall length of 1.844 inches fits TG/PG 75 collet chuck depth
• Maximum body diameter of 1.062 inches matches TG/PG 75 series seat geometry
• Standard single angle collet design for reliable clamping and release

Compatibility

Designed for use with TG/PG 75 series collet chucks and toolholding systems. Accepts 0.125-inch (1/8-inch) round tool shanks.

Installation Notes

Installation is performed by a machinist or toolroom technician. Remove the toolholder from the spindle and ensure the collet chuck bore and collet body are clean and free of chips before seating the collet. Use the appropriate spanner wrench or collet nut wrench specified for the TG/PG 75 chuck - do not use pipe wrenches or improvised tools that can damage the collet nut. Verify runout with a dial test indicator after clamping to confirm the collet is seated properly before resuming cutting operations.