Parker W169PLP-6M-4R 90 Swivel Male Elbow Fitting 300 Psi

Product Description

The PARKER W169PLP-6M-4R is a push-to-connect 90-degree swivel male elbow fitting designed for tube-to-male tube connections in fluid and pneumatic systems. Constructed from nickel-plated brass, it accepts a 6mm outside diameter tube on the push-to-connect end and terminates in a 1/4 inch BSPT male thread on the other. The fitting is rated to 300 psi maximum working pressure and handles temperatures from 0 degrees F to 200 degrees F. The silver body features a yellow release button for quick tube removal without additional tooling. Silicone-free grease and UL94 V-0 flame resistance compliance make this fitting suitable for applications where contamination control and material safety matter. HVAC, refrigeration, and pneumatic control technicians regularly specify this type of fitting for instrument and control line work.

This fitting is intended for use in pneumatic control systems, compressed air lines, and fluid handling circuits where a 90-degree directional change is required between a push-to-connect tube and a BSPT male threaded port. The 6mm tube outside diameter and 1/4 inch BSPT thread size suit compact panel and manifold installations common in commercial HVAC controls, pneumatic actuators, and light industrial equipment. The swivel design on the male end allows thread engagement without twisting the connected tubing, simplifying installation in confined spaces.

Key Features

• Push-to-connect design accepts 6mm OD tube without additional ferrules or compression fittings
• 90-degree swivel male elbow allows angular routing with a 1/4 inch BSPT threaded port
• Nickel-plated brass construction provides corrosion resistance in air and compatible fluid service
• Rated to 300 psi maximum working pressure across a 0 degrees F to 200 degrees F temperature range
• Yellow release button enables fast, tool-free tube disconnection
• Silicone-free grease and UL94 V-0 flame resistance compliance for sensitive environments

Compatibility

Designed as an OEM-style push-to-connect elbow fitting for pneumatic and fluid control systems using 6mm OD tubing and 1/4 inch BSPT male threaded ports. Confirm thread standard (BSPT) and tube outside diameter before installation, as BSPT is not interchangeable with NPT.

Installation Notes

Installation is performed by qualified pneumatic or HVAC technicians. Depressurize and isolate the system completely before removing or installing fittings. Apply thread sealant rated for the working fluid to the BSPT male threads; BSPT is a parallel thread and requires sealant to achieve a pressure-tight joint. Insert the tube squarely into the push-to-connect end until it seats fully; to release, press the yellow button inward while pulling the tube straight out.