Parker BD-0507-16-16-1 Hydraulic Swivel Fitting 3000 Psi

Product Description

The PARKER BD-0507-16-16-1 is a straight swivel fitting designed for hydraulic hose assemblies operating at up to 3,000 psi. Part of the Parker 0507 series, this fitting uses a threaded SAE ORB (O-Ring Boss) connection type to provide a reliable, leak-resistant seal in high-pressure hydraulic circuits. The body is constructed from steel for durability in demanding fluid power applications. At 2.12 inches overall length and a weight of 0.7 pounds, it is a compact component suited for routing hydraulic lines in tight installations. Licensed hydraulic technicians and fluid power mechanics are the typical installers.

This fitting is used in hydraulic systems that require a swivel connection to reduce hose strain and allow rotational movement during assembly or operation. The 16 mm hose size paired with a 1-5/16-12 thread makes it appropriate for medium to large-bore hydraulic hose assemblies in industrial, mobile, and construction equipment applications. Its straight geometry suits runs where inline alignment is needed and flexibility at the hose end is required. The SAE ORB port end meets SAE 140157 standards, making it compatible with standard SAE O-Ring Boss port configurations commonly found across hydraulic manifolds, pumps, and cylinders.

Key Features

• 3,000 psi maximum working pressure for demanding hydraulic circuit use
• SAE ORB threaded connection provides a positive O-ring face seal at the port end
• Straight swivel geometry allows hose rotation to relieve torsional stress during installation
• Steel construction resists deformation under sustained hydraulic pressure
• Meets SAE 140157 standards for dimensional and performance compliance
• Compact at 2.12 inches overall length, suitable for space-constrained installations

Compatibility

Designed for use with 1-inch hydraulic hose assemblies using a 1-5/16-12 thread end, terminating at SAE ORB ports on hydraulic manifolds, pumps, motors, and cylinders that comply with SAE 140157.

Installation Notes

Installation should be performed by a qualified hydraulic technician or fluid power mechanic. Depressurize and isolate the hydraulic circuit completely before disconnecting or installing any fittings. Inspect the O-ring sealing surface and replace the O-ring if damaged prior to assembly. Tighten to the fitting manufacturer's recommended procedure for SAE ORB connections and verify the circuit for leaks before returning the system to service.