Parker 7055GHT63-600 Contractor Hose 125 Psi 50 Ft

Product Description

The PARKER 7055GHT63-600 is a 50-foot rubber contractor hose designed for demanding water delivery applications in commercial and trade environments. Built from black chloroprene rubber, it resists abrasion, oil exposure, and weathering that would degrade standard garden hoses. Multiple textile plies reinforce the hose wall for sustained strength under pressure. It is rated to 125 psi maximum working pressure and handles temperatures up to 180 degrees F, making it suitable for year-round job-site use. The 3/4-inch GHT (garden hose thread) fittings connect to standard spigots and equipment without adapters. Plumbers, general contractors, and facilities maintenance crews are the typical installers.

This hose is suited for contractor and light industrial water supply tasks including equipment washdown, concrete mixing, irrigation setup, and general site water distribution. The chloroprene compound holds up against ground abrasion and incidental contact with petroleum-based fluids common on active job sites. The 5/8-inch inner diameter delivers adequate flow volume for most trade water-supply tasks. At 50 feet, it provides practical reach from a single connection point without requiring a hose extension.

Key Features

• Black chloroprene rubber construction resists abrasion, oil, and weathering
• Multiple textile plies provide wall strength and pressure durability
• Rated to 125 psi maximum working pressure
• Handles water temperatures up to 180 degrees F
• 3/4-inch GHT fittings compatible with standard hose bibs and spigots
• 50-foot length with no self-coiling behavior for predictable lay-flat handling

Compatibility

Designed for use with standard 3/4-inch GHT (garden hose thread) fittings and connections found on commercial hose bibs, pressure washers, and job-site water supply equipment.

Installation Notes

Shut off the water supply before connecting or disconnecting the hose. Hand-tighten GHT fittings and check for leaks before pressurizing; use thread tape on metal-to-metal connections if needed. Do not exceed the 125 psi maximum working pressure or the 180 degrees F temperature rating. Drain and store the hose away from direct UV exposure and sharp edges to extend service life.