Panduit FW2ERLNSNSNM008 OM5 Duplex Lc Fiber Patch Cable

Product Description

The PANDUIT FW2ERLNSNSNM008 is an OM5 duplex fiber optic patch cable designed for high-density structured cabling installations. This 2-fiber assembly uses a 1.6mm diameter jacketed construction with an OFNR (Optical Fiber Nonconductive Riser) rating, making it suitable for vertical runs between floors in commercial buildings. It terminates with LC duplex connectors on both ends and is built to support wideband multimode transmission applications. Licensed low-voltage technicians and network cabling installers use this cable to interconnect switches, patch panels, and active equipment in data center and enterprise LAN environments.

This patch cable is rated for riser-class installations and is well suited for backbone and horizontal runs within commercial and enterprise network infrastructure. The OM5 fiber classification supports wideband multimode optics (WBMMF), enabling short-wavelength division multiplexing (SWDM) alongside standard 10G, 25G, and 40G multimode applications. It is packaged individually and intended for use in structured cabling systems where high bandwidth density is required.

Key Features

• OM5 wideband multimode fiber supports SWDM and high-speed data transmission up to 40G and beyond
• OFNR riser-rated jacket approved for vertical runs between building floors
• 1.6mm duplex zipcord jacket construction for flexible routing in tight cable management
• LC duplex connectors on both ends for compatibility with high-density switch and panel ports
• 2-fiber configuration supports full-duplex transmit and receive paths

Compatibility

Designed as an OEM-style patch cable for use in OM5 wideband multimode fiber networks terminating with LC duplex ports on switches, media converters, and fiber patch panels.

Installation Notes

Installation should be performed by a qualified low-voltage cabling technician following TIA-568 structured cabling standards. De-energize or place active equipment in a safe state before disconnecting live fiber links, and avoid exceeding the minimum bend radius of the cable during routing. Keep LC connector end-faces clean and inspect with a fiber scope before mating to prevent insertion loss. Do not route OFNR-rated cable in air-handling plenum spaces where an OFNP plenum rating is required by code.