Panduit F92EPKDLDSDM025 OS2 Duplex Fiber Patch Cable Lc

Product Description

The PANDUIT F92EPKDLDSDM025 is an OS2 single-mode duplex fiber optic patch cable designed for structured cabling and data network installations. Built with a 1.6mm diameter cable and LC keyed connectors, this patch cord supports high-bandwidth, long-distance signal transmission in commercial and enterprise environments. The OFNP (optical fiber nonconductive plenum) jacket rating makes it suitable for installation in air-handling spaces where fire and smoke codes apply. Network technicians and low-voltage cabling installers use this cable to interconnect equipment in telecom rooms, data centers, and structured cabling systems.

This patch cable is intended for use in commercial building networks, data centers, and enterprise LAN or SAN environments where OS2 single-mode fiber infrastructure is in place. The keyed LC connector design helps prevent accidental mismating in high-density patch panels and fiber distribution units. The plenum-rated jacket meets the requirements for installation in HVAC return-air plenum spaces without the need for conduit. It is sold as a single cable unit.

Key Features

• OS2 single-mode fiber for long-distance, high-bandwidth data transmission
• Duplex configuration with 2 fibers in a single 1.6mm cable assembly
• LC keyed connectors reduce mismating risk in high-density fiber environments
• OFNP plenum-rated jacket approved for installation in air-handling plenum spaces
• Pre-terminated factory-assembled cable ready for immediate deployment

Compatibility

Designed as an OEM-style replacement or standards-compliant addition for OS2 single-mode fiber optic cabling systems using LC keyed connector interfaces.

Installation Notes

Installation should be performed by a qualified low-voltage cabling technician or registered communications distribution designer (RCDD). Deactivate active ports and follow lockout procedures on connected switches or transceivers before handling fiber connectors. Avoid bending the cable below its minimum bend radius and do not apply excessive pull tension during routing. Plenum installations must comply with applicable local building and fire codes referencing NFPA 70 (NEC) Article 770.