Osborn 0002104600 Wheel Brush 6 in Crimped Brass

Product Description

The OSBORN 0002104600 is a 6-inch diameter wheel brush designed for aggressive surface preparation, deburring, cleaning, and finishing on metal and other hard materials. It uses crimped brass wire fill, which provides flexible bristle action that conforms to irregular surfaces while resisting corrosion-causing material contamination. The brush mounts via a 1-1/4-inch arbor hole with a two-keyway style for positive drive engagement. Rated to 6,000 RPM, it suits bench grinders, pedestal grinders, and industrial arbor setups. With a face width of 5/8 inch and a trim length of 1-1/8 inches, it delivers consistent contact across the work surface. Machinists, fabricators, and maintenance technicians are the primary users.

This wheel brush is suited for metalworking applications where brass wire is preferred to avoid sparking or to prevent iron contamination on stainless steel and non-ferrous metals. It performs well in light-to-medium deburring, scale removal, weld cleaning, and surface blending tasks on workbenches or production grinder setups. The crimped wire construction provides a flexible, forgiving bristle action appropriate for contoured or finished surfaces that require cleaning without aggressive material removal.

Key Features

• 6-inch outside diameter with 5/8-inch face width for broad surface contact
• Crimped brass wire fill for flexible bristle action and corrosion-safe use on non-ferrous metals
• 1-1/4-inch arbor hole with two-keyway style for secure, positive drive mounting
• Rated to 6,000 RPM for use on standard bench and pedestal grinders
• 1-1/8-inch trim length delivers consistent bristle engagement across the work surface
• No shank included — mounts directly to arbor-style grinder spindles

Compatibility

Designed for use on bench grinders, pedestal grinders, and industrial arbor setups that accept a 1-1/4-inch arbor hole with a two-keyway drive style.

Installation Notes

Installation should be performed by a qualified operator familiar with abrasive wheel safety and grinder setup. Always power down and lock out the grinder before mounting or removing the brush. Verify the machine spindle speed does not exceed the 6,000 RPM maximum rating of the brush before operation. Wear appropriate eye and face protection, and confirm the arbor flanges and hardware are in good condition before use.