Orbit Industries EEL22-350 Emt Conduit Elbow 22.5 Degree

Product Description

The ORBIT INDUSTRIES EEL22-350 is a 22.5-degree elbow fitting manufactured from prime EMT conduit stock. It is designed to redirect EMT conduit runs at a 22.5-degree angle within electrical raceway systems. The fitting is produced in compliance with ANSI C80.3 (UL797) and carries a UL certification under UL File Number E358011. Interior and exterior surfaces are free from defects and feature a smooth welded seam. A hot-dip galvanizing process applies an even zinc coating throughout, providing corrosion resistance suited to standard installation environments. Licensed electricians install this fitting in both residential and commercial conduit systems.

This elbow is suited for use in EMT conduit installations where a shallow 22.5-degree direction change is required. At a 3-1/2 inch trade size, it accommodates larger conduit runs typical of commercial, industrial, and utility electrical distribution work. It is used to connect sections of EMT conduit where routing must navigate structural obstacles or follow building geometry at a gradual angle. The fitting is available in a standard package quantity of 40 units, making it practical for job-site ordering in volume.

Key Features

• 22.5-degree bend angle for gradual conduit direction changes
• Manufactured from prime EMT conduit per ANSI C80.3 (UL797)
• Hot-dip galvanized zinc coating on interior and exterior surfaces
• Smooth welded seam with defect-free surface finish
• UL certified — UL File Number E358011
• Standard package quantity of 40 units

Compatibility

Designed as an OEM-style replacement and standard fitting for 3-1/2 inch trade size EMT conduit systems installed in accordance with NEC requirements.

Installation Notes

Installation should be performed by a licensed electrician in compliance with applicable National Electrical Code (NEC) requirements. De-energize all circuits in the affected conduit run before beginning work. Secure conduit and fittings with approved straps and supports at intervals required by code. Do not over-stress the fitting during conduit alignment, as EMT elbows are not designed to bear structural loads.

Technical Specifications

• Trade Size: 3-1/2 inches
• Bend Angle: 22.5 degrees
• Standard: ANSI C80.3 (UL797)
• Certification: UL — File Number E358011
• Finish: Hot-dip galvanized zinc
• Standard Package Quantity: 40 units

Standard Information

• Brand: ORBIT INDUSTRIES
• Manufacturer Part Number: EEL22-350