Onsrud 70-360 Slitting Slotting Saw 2 in 16T Carbide

Product Description

The ONSRUD 70-360 is a carbide-tipped slitting and slotting saw designed for high-speed cutting operations in plastics and hard materials. Measuring 2 inches in diameter with a blade thickness of 0.095 inches, this saw features 16 teeth and a right-hand cutting direction. The -5-degree rake angle is engineered to control chip flow and reduce material stress during cutting. The bright, uncoated finish keeps the cutting edge sharp and is well suited to non-ferrous and thermoplastic applications. Licensed trades and machining specialists use this saw in CNC routers and spindle-mounted setups where precise slotting or slitting passes are required.

This saw is intended for use on hard materials including cast acrylic, melamine, nylon, PVC, and vinyl. It accepts a 1/2-inch shank and is rated for a fast feed rate, making it a productive choice for production routing environments and fabrication shops processing plastic sheet goods, trim components, or laminated panels. The carbide-tipped construction handles the abrasive nature of these materials without rapid edge degradation typical of high-speed steel alternatives.

Key Features

• 2-inch blade diameter with 0.095-inch blade thickness for precise slotting cuts
• 16 carbide-tipped teeth with a -5-degree rake angle for controlled chip evacuation
• Right-hand cutting direction compatible with standard spindle rotation
• Bright, uncoated finish - no coating buildup to affect dimensional tolerances
• Fast feed rate rating supports high-throughput production environments
• 1/2-inch shank connection for secure tool holding in routers and milling setups

Compatibility

Designed for use with cast acrylic, melamine, nylon, PVC, and vinyl workpieces. Fits tool holders and collets accepting a 1/2-inch shank diameter.

Installation Notes

Installation and tool changes must be performed with the machine powered down and locked out per applicable safety procedures. Secure the shank fully into the collet or tool holder and verify runout before initiating a cut. A licensed machinist or CNC operator should confirm spindle speed and feed rate are appropriate for the specific material and thickness before production runs. Do not exceed the tool's rated cutting parameters for the material being processed.