Oatey 2048AVBLF Quarter Turn Angle Stop Valve

Product Description

The OATEY 2048AVBLF is a solid brass quarter turn angle stop valve with a venetian bronze finish, designed for shutoff service on supply lines to plumbing fixtures. The valve features a 1/2 inch female iron pipe (FIP) inlet and a 3/8 inch OD outlet, and ships with adapters that expand installation compatibility to 5/8 inch OD (1/2 inch nominal copper) or 3/8 inch FIP configurations. Constructed from lead-free brass, the 2048AVBLF contains less than 0.25% weighted average lead content on wetted surfaces, meeting lead-free requirements under applicable plumbing codes. Licensed plumbers and experienced plumbing contractors are the primary installers.

This angle stop valve is suited for residential and light commercial plumbing applications. It is typically installed at the wall or floor behind toilets, under lavatories, or at other fixture supply connections where a 90-degree turn from the supply stub-out is required. The quarter turn ball-type operation allows fast, positive shutoff without the multiple turns associated with compression or globe-style stops. The venetian bronze finish coordinates with matching trim packages in bath and kitchen settings.

Key Features

• Solid lead-free brass construction with less than 0.25% weighted average lead content on wetted surfaces
• Quarter turn operation for fast, positive shutoff
• 1/2 inch FIP inlet with 3/8 inch OD outlet
• Includes adapters for 5/8 inch OD (1/2 inch nominal copper) or 3/8 inch FIP connection
• Venetian bronze finish for decorative trim compatibility

Compatibility

Designed as an OEM-style replacement or new-installation angle stop for residential and light commercial fixture supply lines requiring a 1/2 inch FIP inlet connection. Adapter set supports 5/8 inch OD (1/2 inch nominal copper) or 3/8 inch FIP outlet configurations as stated by the manufacturer.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the main water supply and relieve line pressure before removing the existing stop valve. Use thread sealant or PTFE tape on all threaded connections and verify adapter selection matches the outlet tubing size before tightening. Do not overtighten threaded connections on brass fittings, as this can damage the threads or crack the valve body.