Nvent 4550075EG Split Ring Hanger 3/4 Inch Pipe

Product Description

The NVENT 4550075EG is a 455 Series malleable cast iron split ring hanger with an electrogalvanized finish, designed to support 3/4-inch pipe in suspended piping systems. The hanger accommodates pipe with a 1.050-inch outer diameter and accepts a 3/8-inch threaded rod for overhead suspension. With a rated max load of 180 pounds, it delivers solid load-bearing performance for rigid piping runs. The split ring design allows the hanger to be installed around pipe without disassembling the run, speeding up installation in both new construction and retrofit applications. Plumbers, pipefitters, and mechanical contractors install this type of hanger in commercial and residential mechanical rooms, pipe chases, and suspended ceiling spaces.

The 4550075EG is suited for suspended pipe support in plumbing, HVAC hydronic, and mechanical piping systems where a 3/4-inch pipe size is required. The electrogalvanized finish provides corrosion resistance appropriate for interior dry or mildly humid environments such as mechanical rooms, utility spaces, and above-ceiling plenum areas. It is a standard component in rod-hung pipe support assemblies and is typically installed in multiples along a pipe run at code-specified support intervals.

Key Features

• Supports 3/4-inch pipe with a 1.050-inch outer diameter
• Accepts 3/8-inch threaded rod for overhead suspension
• 180-pound rated max load for reliable pipe support
• Malleable cast iron construction for durability under load
• Electrogalvanized finish for corrosion resistance in interior applications
• Split ring design allows installation without disassembling the pipe run

Compatibility

Designed as an OEM-style replacement and standard-fit split ring hanger for 3/4-inch pipe with a 1.050-inch outer diameter, used in rod-hung pipe support systems with 3/8-inch threaded rod.

Installation Notes

Installation is typically performed by licensed plumbers or pipefitters following IPC and local mechanical code requirements for pipe support spacing. Before servicing an existing piping system, shut off the relevant fluid supply and relieve system pressure as required. Use appropriate threaded rod and hardware rated for the intended load. Do not exceed the 180-pound max load rating for this hanger.