Norton 69936653306 Wheel Brush 6 in Carbon Steel Arbor

Product Description

The NORTON 69936653306 is a carbon steel wheel brush designed for aggressive surface preparation, deburring, and weld cleaning on metal workpieces. Mounted via an arbor hole, it mounts directly to bench grinders, angle grinders, or similar rotating equipment. The brush features a cable twist wire knot configuration that delivers consistent cutting action and resists wire fatigue under heavy use. With a maximum rated speed of 6500 RPM and a 6-inch outside diameter, it covers broad surface areas efficiently. This brush is suited for use by metal fabricators, maintenance technicians, and industrial tradespeople who need a durable rotary wire brush for regular shop or field work.

This wheel brush is used in applications requiring metal surface cleaning, rust and scale removal, paint stripping, and weld bead blending. The 3/4-inch face width and 1-1/8-inch trim length make it well suited for flat and slightly contoured surfaces. It is a common tool in fabrication shops, maintenance facilities, and industrial job sites where power-tool surface prep is part of routine workflow.

Key Features

• 6-inch outside diameter provides broad surface contact for efficient cleaning passes
• Carbon steel fill material for aggressive rust, scale, and paint removal
• Cable twist wire knot construction resists wire fatigue and maintains consistent scratch pattern
• 6500 RPM maximum rated speed compatible with standard bench and angle grinders
• Round arbor hole mount for secure, centered installation on standard arbors
• 3/4-inch face width and 1-1/8-inch trim length suited for flat surface work

Compatibility

Designed as an arbor-hole-mount replacement wheel brush for use on bench grinders, pedestal grinders, and angle grinders that accept standard round arbor tooling and operate within the 6500 RPM maximum speed rating.

Installation Notes

Installation should be performed by a qualified technician familiar with rotating abrasive and wire brush tooling. Always power down and disconnect the grinder from its power source before mounting or removing the brush. Verify that the grinder spindle speed does not exceed the 6500 RPM maximum rating marked on the brush before operation. Eye protection, face shield, and appropriate PPE are required when operating rotary wire brushes per ANSI B11 and OSHA 1910.215 guidelines.