Norton 69014191692 Surface Grinding Wheel 150 Grit

Product Description

The NORTON 69014191692 is a Type 1A1 diamond surface grinding wheel designed for precision material removal and finishing on hard or abrasive workpieces. It measures 6 inches in diameter and 1/4 inch thick, with a 1-1/4 inch arbor hole. The wheel uses a resinoid bond with a synthetic diamond (SD) abrasive at 150 grit, placing it in the very fine grade range. A superabrasive concentration of 100 and a soft wheel hardness rating (R) combine to deliver consistent stock removal with controlled surface finish. This wheel is rated for wet operation and is suited for both roughing and finishing applications.

The NORTON 69014191692 is used in surface grinding applications where conventional abrasives fall short, such as grinding carbide tooling, ceramics, glass, or other hard materials. Wet operation helps control heat buildup and flush swarf from the work zone, which is critical when maintaining tight tolerances on hardened substrates. This wheel is a standard selection for tool and cutter grinding setups in machine shops and production environments. Licensed machinists and toolroom technicians are the typical end users.

Key Features

• Type 1A1 flat wheel geometry with no recess for straightforward surface grinding setups
• Synthetic diamond (SD) abrasive at 100 percent concentration for consistent cutting performance
• 150 grit very fine grade for smooth surface finish on hard materials
• Resinoid bond provides a degree of compliance that reduces workpiece heat and chipping
• Rated for wet operation to improve surface finish and extend wheel life
• Superabrasive depth of 1/4 inch provides substantial usable abrasive material

Compatibility

Designed as a replacement-style diamond surface grinding wheel for surface grinders and tool and cutter grinders accepting a 6 inch diameter, 1-1/4 inch arbor hole, Type 1A1 wheel configuration.

Installation Notes

Installation and dressing of diamond grinding wheels should be performed by a qualified machinist or toolroom technician. Power down and lock out the grinder before mounting or changing the wheel. Verify that the machine spindle speed does not exceed the maximum RPM rating marked on the wheel before operation. Inspect the wheel for cracks or chips prior to mounting and never use a damaged wheel.