Norton 66261008051 Deburring Disc 6 in Extra Coarse

Product Description

The NORTON 66261008051 is a 6-inch diameter aluminum oxide deburring disc designed for aggressive material removal and edge cleanup on metal workpieces. The disc mounts via a 1/2-inch arbor hole and runs at up to 8000 RPM, making it suitable for use with standard angle grinders and disc sanders. At an extra coarse grade and density rating of 7, it cuts quickly through burrs, flash, and rough edges left by machining, cutting, or stamping operations. The flexible construction allows the disc to conform to irregular surfaces without gouging the base material. Fabricators, machinists, and metal finishing technicians are the primary users of this product.

This deburring disc is suited for use in fabrication shops, machine shops, and light industrial environments where rapid burr removal is required on ferrous and non-ferrous metals. The extra coarse aluminum oxide abrasive is well matched to carbon steel, stainless steel, and aluminum workpieces. Its flexible disc format makes it effective on flat surfaces as well as contoured or edge profiles where a rigid abrasive would lose contact. At 1/2 inch thick, it provides enough body to maintain consistent stock removal without excessive loading.

Key Features

• 6-inch diameter aluminum oxide abrasive disc for fast burr and edge cleanup
• Extra coarse grade with density rating of 7 for aggressive material removal
• Flexible construction conforms to irregular and contoured surfaces
• 1/2-inch arbor hole for standard disc grinder and sander compatibility
• Rated to 8000 RPM maximum for use with common angle grinders
• 1/2-inch disc thickness supports consistent contact and stock removal

Compatibility

Designed as an OEM-style replacement deburring disc for use with angle grinders and disc sanders accepting a 6-inch diameter disc with a 1/2-inch arbor mount.

Installation Notes

This disc is installed and serviced by machinists, fabricators, and metal finishing technicians. Before mounting, confirm the grinder or sander spindle speed does not exceed the 8000 RPM disc rating. Power down and disconnect the tool from its power source before changing discs. Inspect the disc for cracks or damage before each use and do not use a disc that shows visible defects.