Norton 076607-00936 Dual Angle Sanding Sponge Med Coarse

Product Description

The NORTON 076607-00936 is a dual-angle MultiSand sanding sponge designed for hand sanding on flat, contoured, and detailed surfaces. Measuring 4-7/8 inches by 2-7/8 inches by 1 inch, it features abrasive coating on all four sides, allowing continuous use without repositioning. The medium/coarse grit combination makes it well-suited for material removal and surface prep on wood, drywall, metal, and similar substrates. Tradespeople and finishing contractors reach for this sponge when working joints, edges, and profiles where rigid abrasives lose contact with the surface.

The dual-angle profile on the 076607-00936 targets inside corners, beveled edges, and irregular contours that flat sanding blocks cannot follow cleanly. It is a practical choice for drywall finishing, furniture prep, and general surface conditioning in both residential and light commercial settings. The four-sided abrasive coverage extends usable life compared to single-face sponges, reducing how often the tool needs to be swapped out during a job.

Key Features

• Dual-angle body profile reaches inside corners and contoured surfaces flat blocks cannot access
• All four sides coated with abrasive for extended use per sponge
• Medium/coarse grit combination handles material removal and surface prep in a single tool
• Compact 4-7/8 x 2-7/8 x 1 inch form factor fits comfortably in one hand
• Flexible sponge substrate conforms to irregular profiles and curved surfaces

Compatibility

Designed as a general-purpose hand sanding sponge suitable for wood, drywall, metal, and painted surfaces where medium to coarse abrasion is required.

Installation Notes

No power source or special tooling is required for use. When sanding drywall compounds or joint finishes, wear an appropriate dust respirator and eye protection per applicable safety standards. Sand with consistent, even pressure to avoid gouging soft substrates. Rinse the sponge with water if the abrasive loads with dust, as the sponge backing is designed to be washable for extended service life.

Technical Specifications

• Dimensions: 4-7/8 inches x 2-7/8 inches x 1 inch
• Grit: Medium/Coarse
• Coated Sides: 4
• Profile: Dual Angle
• Unit of Measure: Each
• Minimum Order Quantity: 24

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-00936