Norgren C01670838 Swivel Tee Adapter 3/8 Inch Bspt

Product Description

The NORGREN C01670838 is a push-to-connect swivel tee adapter designed for pneumatic and fluid plumbing lines that require a branch connection off a main tube run. Constructed from brass, this fitting accepts an 8 mm outside diameter tube on the two push-to-connect ports and terminates with a male BSPT threaded end. It is rated to 150 psi maximum working pressure and handles temperatures from 0 degrees F up to 175 degrees F. The nitrile O-ring seal provides reliable, leak-free performance across the rated operating range. HVAC, refrigeration, and industrial plumbing technicians commonly install this type of fitting when adding a branch line without cutting and replacing existing tubing.

This fitting is suited for general-purpose pneumatic and fluid transfer applications in both light commercial and industrial environments. The swivel tee configuration simplifies installation in tight spaces by allowing the threaded male port to rotate for alignment before final tightening. It is appropriate for installations where a BSPT male thread interface is required on the branch leg and push-to-connect convenience is preferred on the inline tube ports.

Key Features

• Push-to-connect tube ports accept 8 mm outside diameter tubing for tool-free tube insertion
• Male BSPT threaded port for direct connection to BSPT-ported equipment or manifolds
• 150 psi maximum working pressure rating
• Operating temperature range of 0 degrees F to 175 degrees F
• Brass body construction for corrosion resistance and durability
• Nitrile O-ring seal for reliable leak-free performance

Compatibility

Designed as a general-purpose push-to-connect swivel tee adapter for pneumatic and fluid plumbing systems requiring an 8 mm outside diameter tube connection with a male BSPT threaded branch port.

Installation Notes

Installation should be performed by a qualified plumbing or pneumatic systems technician. Depressurize and isolate the system completely before removing any existing fittings or inserting new connections. Ensure tubing is cut square and deburred before inserting into the push-to-connect ports to achieve a proper seal. Verify that the mating thread type is BSPT and not NPT before installation, as these thread forms are not interchangeable.