Norgren 124670210 Swivel Male Tee 5/32 Inch 10-32 Unf

Product Description

The NORGREN 124670210 is a Pneufit push-to-connect swivel male tee fitting designed for pneumatic tubing systems. It accepts 5/32-inch outside diameter tubing on both tube ports and features a 10-32 UNF male thread on the branch connection. Constructed from nickel-plated brass, it handles pressures up to 260 psi and operates across a temperature range of -4 degrees F to 175 degrees F. A vacuum rating of 29.5 in-Hg makes it suitable for both pressure and vacuum circuit applications. HVAC technicians, pneumatic control specialists, and mechanical contractors install this type of fitting in instrument and control tubing runs.

This fitting is suited for general-purpose pneumatic applications in both light commercial and industrial control systems. The push-to-connect design on the tube ports allows fast, tool-free tube insertion while the swivel male thread simplifies alignment during installation into manifolds, valves, or instrumentation ports. The tee configuration routes a single tubing line into two directions while maintaining a threaded connection to a panel or component.

Key Features

• Push-to-connect tube ports accept 5/32-inch OD tubing without additional tools
• Swivel male tee design eases thread engagement and tube alignment simultaneously
• Nickel-plated brass construction resists corrosion in general-purpose pneumatic environments
• Rated to 260 psi maximum working pressure
• Vacuum-rated to 29.5 in-Hg for use in both pressure and vacuum circuits
• Wide service temperature range: -4 degrees F to 175 degrees F

Compatibility

Designed for general-purpose pneumatic tubing systems using 5/32-inch OD tubing with a 10-32 UNF threaded port. Suitable for use in instrument air, control, and automation pneumatic circuits.

Installation Notes

Installation should be performed by a qualified pneumatic systems technician or mechanical contractor. Depressurize and de-energize the pneumatic circuit completely before removing or installing any fittings. Ensure the mating threaded port is clean and undamaged before engaging the 10-32 UNF thread; do not overtighten, as brass threads can be damaged by excessive force. Verify tube cut ends are clean and square before inserting into push-to-connect ports to ensure a proper seal.