Norgren 120600100 Union Tee Fitting 1/8 Inch Od

Product Description

The NORGREN 120600100 is a push-to-connect union tee tube fitting designed for pneumatic tube-to-tube connections in general-purpose compressed air and fluid systems. Part of the Pneufit line, it accepts 1/8 inch outside diameter tubing on all three ports and requires no tools for installation — tubing inserts and locks in place automatically. The fitting is constructed from nickel-plated brass, rated for a maximum working pressure of 260 psi, and carries a vacuum rating of 29.5 inches Hg. Typical installers include HVAC technicians, pneumatic control system technicians, and industrial maintenance personnel.

The 120600100 is suited for general-purpose pneumatic plumbing where a tee junction between three runs of 1/8 inch OD tubing is required. Common applications include instrument air lines, pneumatic control circuits, and light-duty compressed air distribution in both residential and light commercial equipment. The fitting performs within a service temperature range of -4 degrees F to 175 degrees F, making it appropriate for a wide range of indoor pneumatic control environments.

Key Features

• Push-to-connect design allows tool-free tube insertion and secure mechanical retention
• Nickel-plated brass construction provides corrosion resistance in general-purpose pneumatic service
• Rated to 260 psi maximum working pressure
• Vacuum-rated to 29.5 inches Hg for vacuum circuit applications
• Operating temperature range of -4 degrees F to 175 degrees F
• Compact overall length of 1.26 inches suits tight plumbing layouts

Compatibility

Designed for general-purpose tube-to-tube pneumatic connections using 1/8 inch outside diameter tubing.

Installation Notes

Installation is performed by pneumatic system technicians or qualified HVAC controls technicians. Depressurize the system and verify zero pressure before disconnecting or installing any push-to-connect fitting. Ensure tubing ends are cut cleanly and squarely with a proper tube cutter to achieve a leak-free seal. To release tubing, depress the collet ring before pulling the tube free.